Low-viscosity marine fuel. SMT - low-viscosity marine fuel Diesel fuel SMT what

When they talk about different types of fuel, they always mean long-lasting engine life and economical consumption of flammable liquid in diesel engines.

Specialists in the field of diesel operation are always interested in the efficiency of engine operation, without compromising power and the impact on the technical condition of the power unit. So they are looking for an alternative to more expensive types of fuel. Let's try to find an acceptable replacement by looking at low-viscosity marine fuel (LMV).

Medium and high speed engines are considered quite expensive to operate. In this regard, companies are looking for opportunities to use cheap diesel fuel. SMT is also being considered as an option.

You can order delivery of diesel fuel using this link.

Diesel fuel

Diesel fuel, which is used on ships and high-speed engines, also has a classification: summer, winter and arctic. This is required by GOST rules.

The same standard stipulates the characteristics of the fuel used:

Viscosity (measured at +20°C). Parameters of winter fuel are 1.8-5 cSt, summer - 3-6 cSt;

The flash point of winter diesel fuel is +40°C, summer – +62°C;

Flammability is based on the cetane number. For standard diesel engines it is defined as L-45;

Componentality. This parameter indicates the presence and percentage of sulfur compounds in the fuel. Environmental requirements in European countries limit their quantity to 0.001%.

Low-viscosity fuel for marine engines

It is produced from petroleum by distillation and the addition of gas oil. This is required by GOST 305-82. This type of diesel fuel is used in gas turbines, as well as in medium and high-speed diesel engines.

Main characteristics:

Viscosity (measured at +20°C) from 3 to 6 cSt;

Ignition temperature +60°C;

Cetane number within L-40 – L-45;

Component content (presence of sulfur) 0.5 – 1.5 /

Is it possible to replace regular diesel fuel with SMT?

When comparing the characteristics of the presented types of fuel, you can immediately notice that SMT has more sulfur and a slightly lower cetane number.

If this fuel indicator is greater than the calculated one, it mixes less well with air and does not burn completely. And this increases consumption. With a slight deviation from the passport requirements for fuel, this effect is not noticeable.

If there is little sulfur in diesel fuel, then its lubrication characteristics deteriorate. In this case, additional additives are used.

You need to pay attention to the cost of each type of fuel. SMT is simpler to produce and there are fewer requirements for it, which is why it is cheaper. And such fuel is used not only on ships, saving on costs. And the low percentage of sulfur is compensated for by additives.

Low-viscosity marine fuel belongs to the category of light petroleum products and is intended for high- and medium-speed diesel engines. The Trade-Oil group of companies sells inexpensive SMT fuel, which can be used instead of gas turbine or motor fuel. This fuel is middle distillate and meets the requirements of current regulatory documents:

    Technical Regulations TR TS 013/2011.

    National standard GOST R 54299-2010.

    International ISO 8217:2010.

The diesel fuel sold by our company for marine engines can be used in stationary power plants. The fuel is made exclusively from high-quality raw materials and does not contain waste lubricating oils, inorganic acids or bio-derived materials.

Our company sells diesel fuel, marine fuel of appropriate quality, manufactured in accordance with the requirements for exported petroleum products. Each batch of fuel we sell is supplied with a passport, which confirms the product’s compliance with the requirements of STO 78689379-02-2016..

Purchase and delivery of marine fuel

"GK Trade-Oil" carries out mutually beneficial cooperation with individuals - entrepreneurs, enterprises and organizations of any form of ownership. Our company offers to buy marine fuel on favorable terms in bulk in the quantities required by the client. The minimum quantity corresponds to the volume of tank trucks available in the company’s fleet.

Our company sells high-quality, low-viscosity marine fuel, the price of which can be significantly lower than the average for this market segment. You can view price lists in the office or get information by phone. At the request of the client, delivery of petroleum products to the regions using rail or water transport is organized.

Diesel fuel (Regional refineries)
Price per ton Price per liter Density Quality passport Photo Order
Mendeleev Refinery (Grade C) 47550 rub. RUR 39.70 0,835
Novoshakhtinsky Refinery (Grade C) 47535 rub. RUR 39.85 0,838
Slavyansky Refinery (Grade C) 48300 rub. 40.42 rub. 0,837
Taneco Refinery (Grade C) 48450 rub. 40.45 rub. 0,835
1st plant Kaluga Refinery (Grade C) 47400 rub. RUR 39.72 0,838
Diesel fuel (Federal refineries) "GOST"
Oil refinery "NPZ" Price per ton Price per liter Density Quality passport Photo Order
DT-L-K5 - Grade C - Moscow Refinery 51150 rub. RUB 42.77 0,836
DT-L-K5 – Grade C – Ryazan Oil Refinery RUB 50,950 42.63 rub. 0,837
DT-L-K5 – Grade C - Yaroslavl Oil Refinery 51300 rub. RUR 42.84 0,835

Buy SMT, low-viscosity marine fuel inexpensively with delivery Moscow

If you are looking for where to inexpensively buy LMF (low-viscosity marine fuel) in Moscow and the Moscow region, then contact the MOSNEFTEBUSINESS company. We sell high-quality products from leading manufacturers at the most competitive prices. Now every customer has an excellent opportunity to buy SMT wholesale in Moscow with prompt delivery. We will deliver fuel within 3 hours in exactly the quantity you ordered.

The company's qualified specialists will advise you competently and help you quickly place your order.

Prices from 39,70 r./l.

  • We accept applications - 24 HOURS
  • Own fleet of special equipment for transporting fuel
  • Affordable prices for delivery
  • Car route monitoring using GLONASS system
  • Accurate fuel metering using special meters
  • All grades and types of fuel are always in stock
  • Convenient payment methods

SMT wholesale Moscow

The fuel we sell is excellent for use in stationary power plants, etc. The fuel is made from high-quality, certified raw materials and does not contain waste lubricating oils, etc.

Each batch of SMT is supplied with a corresponding passport, which confirms the compliance of the petroleum product with GOST requirements. Cooperation with our company is a reliable guarantee that you will receive the fuel you ordered in the shortest possible time.

    Optimal prices

    First class service

    Transparent cooperation

    Timely delivery

We value every client, value our own reputation, therefore we are always aimed at long-term, mutually beneficial cooperation. "MOSNEFTEBUSINESS" is a simple scheme of work and no hidden fees. By cooperating with us, you have the opportunity to buy wholesale SMT in Moscow according to an individual calculation scheme (each order is individual, calculated based on the characteristics of your order).

Our products strictly comply with government quality standards. standards, as well as environmental safety requirements

You can buy SMT Moscow, Moscow region wholesale at any time - we accept applications 24 HOURS.

Low-viscosity marine fuel is a specialized fuel obtained by mixing diesel fractions and light gas oils from secondary processes.

It differs from conventional diesel fuel in that it has a high sulfur content and a low cetane number. SMT is widely used at gas turbine stations, in ships with medium and high diesel engine speed.

It is also often used for domestic purposes, for example, in cottages and country houses (places where there is no central gas supply system).

Wholesale supplies of low-viscosity marine fuel in Moscow and the Moscow region

Price for low-viscosity marine fuel

Name Price per kg
(pickup)
Calculated
density
Price for 1 l
(from 5 cubes)
Price for 1 l
(from 11 cubes)
Price for 1 l
(from 23 cubes)
Price for 1 l
(from 30 cubes)
SMT Type II Taneco (Nizhnekamsk) - 0,841 - - - -
SMT Mari SMT (Lukhovitsy) - 0,838 - - - -
TTPB "First Plant" (Kaluga) - 0,825 - - - -

Please call us for prices

Low-viscosity marine fuel (LMV) is represented by three main types:

  • The first type, with a sulfur content of less than 0.5%, is used as fuel for diesel generators, heating systems, power plants and engines. This type is purchased as an analogue to diesel fuel, since there is no need for preliminary preparation. This is due to the low sulfur content.
  • The second type with sulfur from 0.5 to 1% is perfect for various household tasks. It is often used in specially prepared heating boilers, as well as in agricultural enterprises to maintain the operating condition of installations with an average power level.
  • The third type, with sulfur from 1 to 1.5%, has an optimal ratio of quality and cost. It is often used in a variety of power plants and heating boilers. Does not require additional heating. Has good lubricating properties.

Application

Low-viscosity marine fuel is excellent for use in production and domestic purposes. The fuel can be used to refuel power plants, heating boilers and other fuel-burning installations.

Affordable cost coupled with good performance characteristics make this fuel an excellent choice.

You can purchase SMT in the required volume from the oil company Diesel Wholesale, which specializes in the supply of high-quality fuel. Both pickup and delivery to the desired location are possible.